+ 31  9700 5034 599
Product Detail
Share to:
BalFlex Hose 
comment:0
Max Flow Rate: 150,000 L/hr
Max Viscosity: 1,000,000 cps
Temp. Max: 100 °C
Max Pressure: 15 bar
Detail
Message(0)

Types of hoses for peristaltic pumps BalFlex

Peristaltic pumps Albin

Inside wall  (material to choose from 7 references)

External wall

Reinforcement layers (2 to 6)

Albin hose construction :
Matérial choice :
Hoses for Hose Pump Albin Pump

The characteristics of ALBIN hoses enable them to last approximately 30% longer than other hoses on the market. They also fit the majority of other hose pumps.

7 materials are available for ALH and ALP hose pump :

- NR > Natural Rubber (White marking) : High resistance abrasion, the most polyvalent.

- NR Food > Natural Rubber certificate CE 1935-2004 and FDA, black or white inside : appropriate for the food industry.

- NBR > Nitrile Buna (yellow marking) : Appropriate for oils, grease, polymers.

- NBR Food > Nitrile Buna certificate CE 1935-2004 and FDA, black or white inside : appropriate for the food industry.

- EPDM > Ethylene-Propylene-Diene Monomere  (red marking) : High resistance for chemical fluids.

- HYPALON > Polyéthylène chlorosulfoné (blue marking) : High resistance for chemical fluids like sodium hypochlorite , chromic, nitric, sulfuric acids.

- VITON / FKM > (purple marking) : High resistance for chemical fluids, especially solvent, lubricant,

petrol, fuel. Good resistance for the high temperature.

5 materials are only available for ALP hose pump :

- NORPRENE  > High resistance for chemical fluids with sulfuric acid.

- TYGON® > High resistance for chemical fluids like hydrochloric acid at 100%.

- NEOPRENE > High resistance for chemical fluids with alcohol.

- SILICONE > High resistance for chemical fluids with aluminium sulfate.

- PHARMED® > Appropriate for pharmaceutical industry. Hose certificate USP Class VI , FDA 21, CFR 177.2600, NSF listed (Standard 51)